HomeProductsTube Wrap Film Sheet CoverThermal Insulation reflective aluminium metalized pet film for package or agriculture,Metallized PET /PE coated Film PET
PVA Water Soluble Plastic Film, Water Soluble Film:
Water Soluble Film
PVC WRAP:
Cast Cling Film
PE Embroidery Trick Film:
PE Hot Melt Film For Embroidery
Cold Water Soluble Nonwoven Fabric:
Cold Water Soluble Paper
20C Cold Water Soluble PVA Film:
PO(EAA) Hot Melt Adhesive Film
TPU Hot Melt Adhesive Film:
Metal Bonding Polymer Film
Cold Water Soluble Cotton:
PES Hot Melt Adhesive Film
PA Hot Melt Adhesive Film:
Hot Water Soluble Paper
Hot Water Soluble Paper:
PA Hot Melt Adhesive Film
PES Hot Melt Adhesive Film:
Cold Water Soluble Cotton
Metal Bonding Polymer Film:
TPU Hot Melt Adhesive Film
PO(EAA) Hot Melt Adhesive Film:
20C Cold Water Soluble PVA Film
Cold Water Soluble Paper:
Cold Water Soluble Nonwoven Fabric
PE Hot Melt Film For Embroidery:
PE Embroidery Trick Film
Fiberglass:
Radiant Barrier
Swimming Pool Solar Covers:
Pool Covers
Product Description
Product Name
pool cover, solar cover, pool blanket, solar blanket
Material
polyethylene
Color
Blue/Gold,Blue/Sliver,Blue/Black,Blue,Green or customized
Size
Customized
Thickness
12mm or 15mm
Shape
according to your request
Bubble height
3.5mm, 3.7mm, or customized
eyelet
ok
edge
ok
Multi layers aluminum foil insulations for roofing, wall and floor
Introduction
Bagease Multi foil Insulation material provide good thermal barrier property,but only with 38mm
thickness.Compared with the traditional insulation material,like glass wool,foam,rock wool,our
material can not only seal your roof from the wind and dust as a envelop,but keep the inside air
multi-foil insulation material can give you a very high thermal barrier rate,7.17M2.k/w.
Bagease Multi Foil Insulation Material is a very flexible ,easy to install and high performance thermal insulation material,in a 38 mm thin,flexible,multi-layer blankets for roofs and walls. It is an insulation solution complying with the highest insulation, airtightness and vapour resistance performance while being only 38mm thick. It is ideal for roofs and attic conversions.
Bagease Multi foil Insulation material provide good thermal barrier property,but only with 38mmthickness.Compared with the traditional insulation material,like glass wool,foam,rock wool,our,material can not only seal your roof from the wind and dust as a envelop,but keep the inside air.multi.foil insulation material can give you a very high thermal barrier rate,7.17M2.k/w.
Working Principle
The flow smoothly,providing you a good ventilation living surrounding.after installing,your roof will
retain dry and warm in winter,while prevent overheating in summer.The thickness is 38mm and
the beams and rafter can be lefted exposed,so our material will save valuable living space in the attic.
Technology Data
Structure
Item
Value
Unit
17 layers
Total layer number
17
layer
Weight of polywool
55
g/m2
Thickness of EPE foam
0.75
mm
Thickness of silver film
12
micron
Quantity of silver film
10
layers
Weight of both sides silver woven
130
g/m2
Strength of woven
MD
580
N/50mm
CD
580
N/50mm
Protective silver film
12
micron
Emissivity of outer
0.05
Emissivity of inner
0.05
R Value of blanket
Sewing size of stitches
Customized
Position of sewing
5
lines
Thickness of finished material(well pressed)
Around 15
mm
Weight of finished roll
10.8
kg
Square meter
Aluminum Bubble Foil Heat Reflective Insulation Sheets for roof floor an dwall
Product Introduction:
The product consists of three layers of aluminum foil with plastic bubble laminated between the aluminum foil,provides excellent insulation: Reflects up to 97% of radiant energy in addition to resisting other types of heat transfer from conduction, convection and radiation. The two side aluminum foil forms an effective barrier against moisture, air currents and vapors. It is an economical solution for a wide range of industrial, manufacturing and consumer applications.
Bagease
Bagplastics
Main Material
Alu + (single / double) PE bubble + Alu
Other Material Structure
MPET + (single / double) PE bubble MPET + (single / double) PE bubble + MPET Alu + (single / double) PE bubble Alu + (single / double) PE bubble + Alu Alu + woven + (single / double) PE bubble + Alu Alu + woven + (single / double) PE bubble + woven + Alu Alu + woven + (single / double) PE bubble + Alu + Anti-glare coating Alu + (single / double) PE bubble + woven + Alu + Anti-glare coating
1.2m *30m/roll ; 1.2m *40m/roll; 1.35m *22.25m/roll; can be customized
Packing:
1 roll/ clear plastic bag or customized logo printing packing bag accept
Data Sheet:
Material Structure: AL/Bubble/AL
Bubble Size:D10mm*H 4mm(10*2.5/10*4/10*6/20*7/25*10)choose the bubble size
Bubble Weight:130gsm
Roll Width:1.2m (lenth can be customized)
PROPERTIES
TEST DATA
UNIT
Thickness
3.5
mm
Weight
256
g/M2
Emissivity
0.03-0.04
COEF
Thermal conductivity
0.034
w/m0
Apparent Density
85
kg/m3
Reflectivity
95-96
%
Water Vapour Transmission
0.013
g/M2kpa
Corrosion
doesn't generate
Tensile Strength(MD)
16.98
Mpa
Tensile Strength(TD)
16.5
Mpa
Installation methods and Installation Projects:
Measure the metal roof to determine the amount of bubble foil wrap insulation required for the project. Purchase approximately 10 to 15 percent more product than required to account for overlapping and to provide the proper air gap between the purlins -- the horizontal lengths of wood that support the roof panels between the rafters.
Cover the metal roof purlins with double-sided adhesive tape. Unroll the foil wrap insulation and attach it to the first purlin. Continue to unroll the foil insulation and attach it the remaining purlins, paying attention to allow the insulation to sag at least 1 inch between the horizontal members. The sagging provides an air gap that raises the insulation’s efficiency.
Continue to attach the Aluminum foil bubble insulation to the metal roofing purloins, overlapping the adjoining sheets 2 inches as you go. This is a temporary hold to keep the bubble foil wrap in place while you prepare the next step.
Secure the bubble foil to the framing members with furring strips. Attach the furring strips perpendicular to the purloins every 24 inches to the framing members with 2-inch metal screws, paying attention to not disrupt the insulation’s sagging. Use a drill equipped with a screwdriver bit to drive the screws into the framing members.
Cover the seams of the bubble insulation with foil tape.
Application:
Roof,Ceiling,Wall,Floor,Attic,Livestock Shelters,Basement,Factory buildings,Duct wrappings,Container liner,Sun-stop cover and vehicles. 1. Thermal insulation and light inflecting in the constrction and protection for both cold winter and water piper 2. Separation of refrigerator,warm keeping for center air-conditioned,refrigerator and other home appliances 3. Thermal insulation,sound absorption and noise reduction for car ,train, refrigerator car and laboratory, moisture proof cushion for traveling.
Building insulation material for construction is a brand new heat insulation product manufactured of polyethylene bubble/foam sheet faced with aluminium foil on the one or two sides. It can reflect 97% radiant heat and reduces energy costs used in winter heating and summer cooling. Reflective Foil thermal insulation is only a few millimeters thick, its two sides of aluminium foil reflects more than 97% thermal energy that reaches it .In summer, almost all the sunlight and heat is bounced back into the air, Keeping the heat out of the air conditioned building. In winter, Almost all the heat generated inside the building is retained. Also, The bubble/foam sheet in between the aluminium foil offer thousands of empety air cells, which makes the heat more difficult to pass through.1) Thickness: 0.017-0.03MM 2) Width: 300MM 450MM 500MM 3) Length: as your request 4) Color: transparent/clear,black,green,and so on 5) Net weight: on buyer's option 6) Packing: cartons or pallets. Product features: 1.100% New material and accept sample order. 2.Excellence and beautiful, the high grade product. 3.Easy to be pulled out and cut. 4. Transparency and no drape and even thickness. 5. Easy to use, can be recycled.
PVA water soluble film Specifications Plastic Film
100% new raw material, LDPE , UV resistance
Thickness: 12 mic --50mic --300 mic .
Colour: Transparent, Black, Red, Blue, Green, etc.
The main products of the company are polyvinyl alcohol (PVA) materials, films and bags etc. We have manufactured a series of products of water-soluble PVA bags for various uses.It could be processed according to customers demand of any size and specification.the water-soluble PVA bags are divided into the inner packing bags and the outer packing bags. Their characteristics are as follows:
1,It will dissolve competely under the normal water temperature(20±5℃) after 5-18 sec.
2,Its final products are CO2 and h3O, non-toxic and non-pollution;
3,The inner packing bags can dissolve completely above 3 ℃, while the outer packing bags can issolve completely above 80 ℃.
4,Printing can be done on both the inner packing bags and the outer packing bags, with clear handwriting, and oil ink and bags will dissolve together.
5 The water-soluble bag has no static electricity, h3 stretching intensity and even tensity .
6,The inner packing bags has heat sealing or tying with the water-soluble rope, while the outer packing bags can have nylon string and self-adhesive foil.
7,The size of water-soluble packing bags can range freely between 4cm*4cm---120cm*120cm.
8,Can be weighted exactly, no waste.
Food Grade POF shrinkable label Shrink Film
Product Name: Polyolefin POF Heat Shrink Wrap Film Material: PP + PE Shrinkage ratio: over 60% Thickness: 12.5micron (50gauge), 15micron (60gauge), 19micron (75gauga), 25micron (100gauge) Roll width: 200mm (8") to 1600mm (80") Roll length: 800m to 1600m for center-folded, 1600m to 3200m for single wound for standard sizes, please refer to the SPECIFICATIONS below Type: single wound, corner folded (also called center-folded,), tube
Specifications :
Thickness (mic/gauge)
15/ 60
19/ 75
25/100
30/120
Width (mm)
100-2100
100-2100
100-2100
100-2100
Length (Single Wound)
2700m
2100m
1600m
1800m
Length (Center Fold)
1335m
1067m
800m
900m
Length (Tubular)
1335m
1067m
800m
900m
Packaging Details : Bags or film rolling on the 3" paper core ,With film bag covered on outside . each sides of core with plastic cap All rolls loading on plastic pallet (1300*1100*150mm) For container loading ,suggest use gusseted fold type 20ft: 8pallets/8-10tons 40ft: 16pallets/16-23tons
Delivery Time: FCL container or LCL container,by sea or by air 20 days after receiving the deposit payment
12mic 19mic heat shrink Perforation POF Shrink film
1. Shrink film thickness and width: Thickness:10mic, 12.5mic, 15mic, 19mic, 25mic and 30mic etc. Width:100-2200mm
2. Shrink film grade: Can be divided into normal grade, medical grade, high strength grade; Can be made of tubular film, L-type fold film and single film, Can be processed into tube bags, flat pockets, ladder bags, round bags and so on.
POF Shrink film FEATURES Cast film, high clarity and shrink rates at transverse direction, well distributed thickness, anti-static treatment for increasing printing and labeling speed. -Suitable for a broad range of applications: tamper evident seals, Pre-forms, and full body sleeve labels. -Low shrink initiation temperature. -Long shell life at recommended storage temperatures. -Excellent for printing high quality graphics. -Ideal for high speed applications. -Can be printed without surface treatment. -Lighter and more cost effcient than tranditional packaging.
Thickness
12mic/50g
15mic/60g
19mic/75g
25mic/100g
Wideness
100mm-2200mm
100mm-2200mm
100mm-2200mm
100mm-2200mm
sinlg would length
3100m
2667m
2133m
1600m
center folded length
1550m
1332m
1067m
800m
POF film type
POF film: Center-fold/Single wound/POF shrink bags,Printing on film,Cross-linked film,Anti-fog film,Micro-perforated film,Pre-perforated film etc
POF package shrink film application:
The POF shrink films are used for labeling and packing products in various industries: -Food & beverage industries: Mineral Water, Soft Drinks, Liquors, Pickles, Jams, Jellies, Fruit Juices, Tea, Coffee,Spices, Ghee, Edible Oils etc. in Bottles / Cans / Jars -Printing & Packaging industries -Cosmetic & Toiletry industries: Powder, Perfume, Hair Oil, Shampoo etc. in bottles & jars -Pharmaceutical industries: Liquid Bottles, Tablet/Powder, Containers & Jars -Electrical industries: for bus bar application and insulation tape packing -Stationery & Writing instrument industries
POF film Packing details: one roll of pof heat shrink film in one carton box; tens of cartons in a pallet; 10~12 pallets pack into 1*20 ft. container; 20~22 pallets load into 1*40 ft. container
Characteristics:PE shrink film is made from high-pressure polythene mixed with relevant auxiliary materials through huffing once, so it features tenacity, softness, impact-resistance and unbreakable.
Varieties: We can make tube-film, L-shaped opposite folding film and single layer film according to customers' request, as well as pipe-bags, flat-orifice bags, trapezoid bags.
Main purpose: suitable for packing of beverage, mineral water, beer, stacks, building materials, metalwork, dairy, glass bottles, and other large equipment and goods.
Your message must be between 20-3,000 characters!